
Drum and container pumps
Safely transfer low-viscosity fluids from drums and IBCs. Also suitable for hazardous areas and food contact.

Products
Series and versions

Drum and Container Pumps
view
F 400 – For low-viscosity fluids from drums or IBCs
view
Food & Pharmaceuticals
FLUX FOOD series compliant with EC Regulation 1935/2004, FDA, and 3-A—with the glass-and-fork symbol.
view
Horizontal stationary use
F 430 TR – Dry-mounted outside the housing for stationary applications with a horizontal pump shaft configuration.
view
IBC emptying & dry installation
MINIFLUX container pumps for horizontal use with IBCs and containers with bottom outlets.
view
Greater delivery heights
F 430 PP Container Pump – Polypropylene version for higher discharge pressures and lower discharge points on IBCs and large containers.
view
99.98% barrel and residual emptying
F 425 / FP 425 – less than 0.05 l of residual liquid in a 200-l drum. A backflow preventer prevents backflow, reducing cleaning and disposal costs.
view
Mixing and Conveying in One
F 426 – Control lever for switching between mixing and pumping during operation. No interruption to the process. Ideal for paints, coatings, and emulsions.
viewProducts
13 products
Overview
FLUX drum pumps reliably and efficiently transfer low-viscosity liquids—from drums, IBCs, and containers—for virtually any medium and application. The modular design allows you to combine the pump, motor, and accessories as needed—quick to change, easy to carry, and ready for immediate use.
Here you will find our range of drum and container pumps. You use this type of pump to empty drums and containers (completely) in a professional and safe way. Besides safety, working with these pumps also improves efficiency: a drum pump transfers liquids quickly and easily. This type of pump is especially suitable for low-viscosity liquids such as solvents. They are pumps for professional use, with all the relevant certificates, for almost any low-viscosity liquid.
Highlights
Versatile – even for corrosive media
From acids and alkalis to fuels, food, and pharmaceuticals: FLUX drum pumps are available in stainless steel, polypropylene, PVDF, aluminum, and Hastelloy-C—tailored to the chemical requirements of the respective medium.

Maximum Safety in Hazardous Areas
The ATEX-certified FLUX drum pumps (tested in accordance with 2014/34/EU and DIN EN 13463) enable safe use with flammable and highly flammable liquids—reliably and in compliance with standards.

Certified for Food and Hygiene
The FLUX FOOD series meets the requirements of Regulation (EC) No. 1935/2004, EU Regulation No. 10/2011, FDA, or 3-A Standard—for use in food, cosmetics, and pharmaceutical facilities without compromising material compliance.

Custom Configuration Instead of a Standard Solution
Whether it’s a seal-less design for a fixed medium application, a mechanical seal for frequent medium changes, or 99.98% tank drainage—FLUX offers the right solution. Complete pump sets and custom-made products round out the portfolio.
Work method
Toepassing vatpomp of containerpomp
Met een vatpomp pompt u eenvoudig en automatisch grote volumes vloeistof over, die omwille van veiligheid of omvang niet op andere wijze kunnen worden overgebracht. In de meeste gevallen gaat het dan om grote vaten of containers en om vloeistoffen die veiligheidsrisico’s vormen en/of kostbaar zijn. Kortom: nauwkeurigheid en het vermijden van contact zijn belangrijk. Bestendigheid tegen verschillende stoffen vermelden wij bij afzonderlijke pompen. Ook wordt elke pomp geleverd met instructies voor het demonteren en reinigen ervan. Voor verschillende volumes hebben wij verschillende varianten.
Gebruik in de praktijk
Het gebruik van een vatpomp is in vrijwel alle gevallen hetzelfde. De pomp dompelt u onder in het vat of de container, via de daarvoor bestemde opening, of eventueel door het vat te openen. Activeer de pomp zoals op de gebruiksaanwijzing wordt aangegeven en de pomp zal overgaan tot het ledigen van de container. Om de vloeistof op de gewenste bestemming te krijgen, wilt u waarschijnlijk gebruik maken van slangen en andere toebehoren. Ook deze bestelt u eenvoudig via onze website.
Advantages

Lightweight
COMBIFLUX and JUNIORFLUX are lightweight—easy drum changes, minimal effort. Quick motor changes using a quick-release coupling.

Greater delivery heights
F 430 PP Container Pump – Polypropylene version for higher discharge pressures and lower discharge points on IBCs and large containers.

Horizontal IBC Use
MINIFLUX Container Pump – compact design at the IBC outlet (S60×6), 1.0 kg, no top access required. Up to 240 l/min, available for Zone 1 hazardous areas.

Hygiene Applications at the IBC
MINIFLUX Sanitary – Compliant with FDA and EC Regulation 1935/2004, can be disassembled without tools, and can be emptied to less than 1% residual content.

Hygiene Applications
F 427 / FP 427 – Can be completely disassembled without tools; minimal dead space. FOOD- and 3-A-certified; up to 240 l/min. For the food, pharmaceutical, and cosmetics industries.

99.98% barrel and residual emptying
F 425 / FP 425 – less than 0.05 l of residual liquid in a 200-l drum. A backflow preventer prevents backflow, reducing cleaning and disposal costs.

Seal-free for consistent media flow
F 424 / FP 424 – for medium-viscosity fluids, without a seal. No seal or bearing wear, resistant to dry running, up to 240 l/min.

Mechanical seal for frequent media changes
F 430 / FP 430 – no carryover of the medium, easy to disassemble. Materials: PP, PVDF, stainless steel, and Hastelloy C; available in food-grade and Ex versions.

Horizontal stationary use
F 430 TR – Dry-mounted outside the housing for stationary applications with a horizontal pump shaft configuration.

Mixing and Conveying in One
F 426 – Control lever for switching between mixing and pumping during operation. No interruption to the process. Ideal for paints, coatings, and emulsions.
Applications
Typical applications and uses of FLUX drum and container pumps.

Small batch sizes
JUNIORFLUX and COMBIFLUX – for containers ranging from canisters to IBCs, narrow enough for tight openings.

Industry & Chemicals
400 Series – high performance, versatile. Also suitable for corrosive media—acids, alkalis, and fuels.

Explosive atmospheres & flammable media
ATEX 2014/34/EU, PTB-certified – Zone 0/1 with an explosion-proof or compressed-air motor.

Food & Pharmaceuticals
FLUX FOOD series compliant with EC Regulation 1935/2004, FDA, and 3-A—with the glass-and-fork symbol.

IBC emptying & dry installation
MINIFLUX container pumps for horizontal use with IBCs and containers with bottom outlets.
In practice

Applications
Pumps are tools—they solve problems. Which pump is the right one depends on the task: filling, transferring, emptying, residual drainage, or mixing.
Compare Applications and UsesCase studies
Dosing oils from IBCs with ±1% accuracy
F 430 S, F 457, FMO 110, FLUXTRONIC®, FSV 100 – Fill an extruder with a preset amount of oil; automatic shutdown when the target amount is reached.
Safely and hygienically enhancing flavors in the ex-area
Orange oil is transferred from 200-liter drums into mixing tanks in a manner that is ATEX-compliant, hygienic, and precisely metered—using the F 430 Ex S and flow measurement.
Mixing and Precisely Filling Coolant-Lubricants
F 426 (mixing and feed pump), F 457-1 EL – Homogenize emulsions and fill them into machine reservoirs.
Filling Ethanol Without Loss and with Explosion Protection
FP 425 Ex S, F 460 Ex, FMC 100 – ATEX kit for the safe emptying of ethanol drums in cosmetics production.
Filling Solvents from IBCs in an Explosion-Proof Environment
Safe filling with the F 430 S Ex, F 460-1 Ex, FMC 100, FLUXTRONIC®, and FSV 121-1.
Technology

Knowledge and Technology
Drum pumps and container pumps are used wherever fluids need to be transferred or filled from drums, canisters, or IBCs in a clean, safe, and flexible manner. They are suitable for a variety of fluids and applications—from occasional filling to continuous industrial operation.
Modular Design
The FLUX barrel pump operates on the principle of an axially acting centrifugal pump. The motor drives the drive shaft via a coupling; a propeller-like rotor is mounted at the end of this shaft. The rotation causes the fluid to be conveyed axially—parallel to the pump shaft—toward the discharge port. For this to occur, the impeller must be completely submerged in the fluid.
The pump, motor, and accessories can be freely combined
Based on the modular design principle, pumps, motors, hoses, dispensing nozzles, and flow meters can be freely combined. Various outer tube materials, seal types, and immersion depths allow for adaptation to different applications and fluids.
- Components: Pump, drive, hose, dispensing nozzle, flow meter
- Handling: Lightweight, quick-connect coupling, easy disassembly, and portable thanks to battery-powered motors
- Performance specifications: Up to 240 l/min, up to 1,200 mPas, immersion depths 700–3,000 mm
Series Comparison
| Pump | Series | Seal | Special Feature |
|---|---|---|---|
| JUNIORFLUX (F 310/F 314) | 300 | Mechanical seal / seal-less | Motor and pump permanently connected, for small flow rates |
| COMBIFLUX (FP 314) | 300 | Seal-less | Detachable motor with quick-release coupling, battery- or AC-powered |
| F 424 | 400 | Seal-free | No seal wear, resistant to chromic acid and hydrochloric acid |
| F 425 | 400 | Mechanical seal | 99.98% tank drainage, backflow preventer |
| F 426 | 400 | Mechanical seal | Mixing and feed pump, control lever for mode selection |
| F 427 | 400 | Seal-less | Hygienic pump, disassembles without tools, FOOD/3-A |
| F 430 | 400 | Mechanical seal | 5 materials (PP, PVDF, stainless steel, aluminum, Hastelloy C), FOOD and Ex versions |
| MINIFLUX | IBC pump | Mechanical seal | IBC emptying via bottom outlet, 1.0 kg total weight |
| MINIFLUX Sanitary | IBC Pump | Seals not greased: PTFE, FKM, EPDM | IBC drainage for hygienic applications, FOOD/FDA CFR 2.1, easy to clean |
ROTORS AND FLOW RATE
FLUX offers two types of rotors: an axial rotor for high flow rates at low pressure requirements, and a semi-axial rotor (Z-version) for higher discharge pressures at lower flow rates. All rotors are made of ETFE (ethylene tetrafluoroethylene). The Ø 38 mm axial rotor is also available in stainless steel.
Comparison of the performance curves for an F/FP 430 drum pump with an F 457 drive motor featuring a 38 mm axial rotor and a 37 mm semi-axial rotor (Z version):
| Axial rotor | Semi-axial rotor (Z version) |
|---|---|
| For high flow rates | For high delivery heads |
| Flow rate: up to 240 l/min Head: up to 13 mWs High flow rates with low pressure requirements Light fluids (density up to 1.3 kg/dm³) Short pressure lines, small height differences | Flow rate: up to 160 l/min Head: up to 30 mWs High delivery heads for heavy media (density 1.3 kg/dm³ and above) Long pressure lines, large height differences Compensates for pressure losses (due to valves and fittings) |
Mechanical seal or seal-less
| MECHANICAL SEAL | SEAL-LESS DESIGN |
|---|---|
| FLUX offers drum pumps with either a mechanical seal or a seal-less wetted tube design. The mechanical seal prevents liquid carry-over during drum or container changes, making it ideal for frequent liquid changes or liquids that harden or crystallize. | The seal-less design eliminates wear parts in contact with the liquid, resulting in no seal wear, optimal draining of the inner tube and a long service life. It is particularly suitable for applications involving hydrochloric acid and chromic acid. |
| For frequent liquid changes and liquids that harden or crystallize | For continuous use with the same liquid and abrasive liquids |
| • Quick and easy disassembly into main components• Extended service life when handling abrasive liquids• Immersion depth up to 3,000 mm (PP/PVDF version)• Ex versions available in stainless steel and Hastelloy C• FOOD version available in accordance with EC 1935/2004 and FDA requirementsSeries: F 425, F 426, F 430 | • Optimal draining of the inner tube • Exceptionally long service life with no seal wear • Standard immersion depth: 700–1,200 mm • Ex version available in stainless steel • No FOOD version availableSeries: F 424, F 427, COMBIFLUX |
Pump Materials and Typical Applications
| Material | Typical media / Applications |
|---|---|
| Polypropylene (PP) | Acids, alkalis – universal standard material for chemically resistant pumping |
| Polyvinylidene fluoride (PVDF) | Concentrated acids (e.g., sulfuric acid) – higher chemical resistance than PP |
| Stainless steel | Solvents, cosmetics, pharmaceuticals, food – most versatile material, suitable for use in hazardous areas |
| Aluminum | Fuels (diesel, gasoline), mineral oils, heating oils |
| Hastelloy C | Highly corrosive acids and alkalis – highest chemical resistance |
Compare
An overview of the most important specifications and features—for selection and comparison.
| Feature | |||||||
|---|---|---|---|---|---|---|---|
| Feature | JUNIORFLUX | COMBIFLUX | F 424 | F 425 | F 430 | F 427 | MINIFLUX |
| Series | 300 | 300 | 400 | 400 | 400 | 400 | MINIFLUX |
| Max. flow rate | 57 l/min | 60 l/min | 240 l/min | 120 l/min | 240 l/min | 240 l/min | 240 l/min |
| Max. delivery head | 8.5 mWs | 8.5 mWs | 13 mWs | 12 mWs | 12 mWs | 13 mWs | 13 mWs |
| Max. viscosity | 250 mPas | 250 mPas | 1,200 mPas | 1,200 mPas | 1,200 mPas | 1,000 mPas | |
| Seal | GRD / seal-less | Seal-less | Seal-less | GRD | GRD | Seal-less | GRD |
| Materials | PP, PVDF, stainless steel | PP, PVDF, stainless steel | PP, PVDF, stainless steel | PP, stainless steel, Hastelloy C | PP, PVDF, stainless steel, aluminum, Hastelloy C | Stainless steel | Stainless steel, ETFE |
| Immersion depths | 300–1,000 mm | 500–1,200 mm | 700–1,200 mm | 700–1,200 mm | 700–3,000 mm | 700–1,200 mm | – |
| Explosion protection | – | – | ✓ (stainless steel) | ✓ (Stainless steel, Hastelloy C) | ✓ (Stainless steel, Hastelloy C) | – | ✓ Zone 1 |
| FOOD / FDA | – | – | – | – | ✓ | ✓ | – |
| 3-A | – | – | – | – | – | ✓ | – |
| Drive | Electric | Rechargeable battery / Electric | Electric / Pneumatic / Battery-powered motor | Electric / Pneumatic / Battery-powered motor | Electric / Pneumatic / Battery-powered motor | Electric / Battery-powered motor | Electric / Battery-powered motor |
| Ideal for | Small quantities | Flexible use | Corrosive media | Complete emptying | Frequent media changes | Hygiene applications | Conveying from IBCs |
The maximum flow rate is a test bench value, measured with water at 20 °C at the pump’s discharge port, without any attachments (hose, dispensing nozzle, flow meter). The flow rate achievable in practice is lower and depends on the specific application, the properties of the fluid, and the pump configuration. Specifications are for axial-rotor pumps unless otherwise noted.
Motors and accessories
The Right Drum Pump for Every Container
Users of our drum pumps and container pumps often wonder what immersion depth they actually need for their canisters, drums, IBCs, and other containers.
FLUX drum pumps are available in standard immersion depths of approximately 700 mm, 1,000 mm, and 1,200 mm. Custom lengths ranging from approximately 300 mm to approximately 3,000 mm are available upon request.
| Containers | Immersion Depth |
| Canisters | approx. 500–700 mm |
| Drum (200 l) | approx. 1,000 mm |
| IBC (1,000 l) | approx. 1,200 mm |
| Large container / tank | Custom lengths up to approx. 3,000 mm |

You may also like
Downloads
Documentation for planning, operation and maintenance.
Operating Instructions
Operating instructions for drum and IBC pumps.
Download per productDimension Sheets
Dimensions and installation dimensions for technical planning and design.
Download per productData Sheets
Technical specifications, dimensions, and performance data.
Download per productPerformance Curves
Flow rate, head, and performance curves for precise pump selection.
Download per productCertificates & Evidence
Declarations of conformity, ATEX/IECEx certificates, as well as ISO, REACH, and other certifications.
Download per productProduct Catalog
The complete FLUX catalog, featuring all product lines, technical specifications, and accessories.
DownloadBrochures
Product brochures and company information to browse and download.
Download
FAQ
Up to what operating pressure can FLUX barrel pumps be used?
Depending on the model and motor power, FLUX barrel pumps achieve a maximum operating pressure (internal pressure) of 3 bar; in practice, this is usually 1–2 bar. When used with FLUX air motors, the maximum permissible operating pressure is 6 bar. At higher pressures, the rotor sliders will wear out prematurely.
What is the 400 Series of barrel pumps designed for?
The 400 Series is FLUX’s most versatile line of drum pumps—for Hobbocks, 200-liter drums, 1,000-liter IBCs, and tanks larger than 1,000 liters.
- Flow rate: up to 240 l/min (axial rotor)
- Head: up to 13 mWs (axial rotor) or up to 30 mWs (semi-axial rotor, Z version)
- Viscosity: up to 1,200 mPas
- Immersion depths: up to 3,000 mm (F 430)
- Materials: PP, PVDF, stainless steel, Hastelloy C, aluminum
Models: F 424 (seal-less), F 425 (backflow preventer), F 426 (mixing pump), F 427 (hygiene/food), F 430 (with mechanical seal)
What is the maximum particle size for which FLUX drum pumps can be used?
FLUX stainless steel drum pumps are suitable for fluids containing solids up to 1.5 mm in size; PP/PVDF pumps are suitable for solids up to 2.5 mm. For abrasive fluids, we recommend using drum pumps with a mechanical seal and a foot strainer.
Details:
- Maximum particle sizes: Stainless steel drum pumps: up to 1.5 mm -- PP/PVDF drum pumps: up to 2.5 mm
- Recommendations to prevent damage: Use a foot strainer to trap dirt particles. -- Particles up to 2.5 mm can pass through the foot strainer without causing damage, but may increase wear on the rotor.
- Abrasive fluids (e.g., water with sand): For stainless steel pumps, a stainless steel rotor is recommended, as it exhibits less abrasion than ETFE rotors. -- Seal-less drum pumps are not suitable for abrasive media (risk of bearing damage). -- Mixing pumps should not be operated with abrasive media, as particles can cause damage between the outer tube and the seal assembly.
- Suitable models for abrasive media, drum pumps with mechanical seals: F 430 S / FP 430 S -- F 425 S / FP 425 S in combination with a foot strainer.
What is the maximum viscosity that FLUX mixing pumps can handle and mix?
The FLUX F 426 mixing pump reliably mixes fluids up to 500 mPas.
Details:
- Mixing + Pumping: up to 500 mPas.
- Pumping only: up to 1200 mPas.
- Optimal range: up to 250 mPas for best mixing results.
- Suitable for low-viscosity media; can also be used in IBCs.
What is the surface finish of FLUX pumps?
FLUX e-polished pumps achieve an average surface roughness of approximately 0.4 µm, but do not consistently meet the requirements for 3A certification. For hygienic applications, 3A-certified pumps with a surface roughness of 0.1–0.2 µm are available.
Details:
- E-polished pumps: Average surface roughness: approx. 0.4 µm. -- Weld seams can reach up to 1.6 µm → not 3A-certified.
- 3A-certified pumps: Surface roughness: 0.1–0.2 µm when new. -- Meet the limit of <0.8 µm on all surfaces in contact with the medium. Background: Smooth surfaces are crucial for preventing particle adhesion and product contamination.
Solutions for hygienic applications:
- 3A-certified FLUX VISCOPOWER progressive cavity pumps – hygienic, FDA- and 3A-compliant.
- 3A-certified versions of the Flux Series 400 drum and container pumps – hygienic, FDA- and 3A-compliant.
- Sanitary versions of the MINIFLUX drum pump (MINIFLUX Sanitary, minimal dead space, for food and pharmaceutical applications.
What materials are drum pumps made of?
- PP (polypropylene): For acids, alkalis, and aqueous solutions.
- PVDF (polyvinylidene fluoride): Higher chemical and thermal resistance.
- Stainless steel: For demanding media, food, and pharmaceuticals.
- Hastelloy C: For highly corrosive media (F 425, F 430).
- Aluminum: For oils (F 430).
Material selection based on the FLUX resistance list.
For which applications is a container pump or IBC pump / MINIFLUX suitable?
The FLUX MINIFLUX pump empties IBCs via the discharge port in a space-saving manner—at a rate of up to 240 l/min for low-viscosity fluids. Available in an Ex-rated version (MINIFLUX) and a sanitary version (MINIFLUX Sanitary).
The FLUX MINIFLUX container pump is designed for horizontal emptying of IBCs via the discharge fitting. It is the ideal solution when access via the fill opening is not possible or impractical due to space constraints. With a flow rate of up to 240 l/min and capable of handling fluids up to 1,000 mPas, it is particularly well-suited for low-viscosity products in the chemical, cosmetics, and food industries.
Application scenarios:
- Emptying IBCs in areas with low ceiling heights or where containers are stacked on top of one another.
- Rapid filling into canisters or transfer to higher-level containers.
- Pumping against closed valves (e.g., dispensing nozzles) is possible.
Advantages:
- Direct connection to the IBC outlet via a standard thread (S60x6).
- Very compact, lightweight design (1.2 kg).
- MNIFLUX Sanitary: quick and easy to disassemble, easy to clean.
- Can also be used in Ex Zone 1. (MINIFLUX)
Available as MINIFLUX Sanitary: minimal dead space, disassembles without tools, easy to clean, compliant with FDA CFR 21 and EC 1935/2004, for hygienic applications.
Technical Data: Flow rate max. 240 l/min, head max. 13 mWS, viscosity max. 1,000 mPas.
Is the MINIFLUX suitable for stacked IBCs?
Yes. Installation at the floor outlet allows for use even when access from above is limited.
What sets the FLUX MINIFLUX apart from other IBC pumps?
The FLUX MINIFLUX and MINIFLUX Sanitary models are characterized by their compact, lightweight, and portable design. They can be mounted directly on the IBC’s discharge valve, which increases flow rate and operational reliability and eliminates the need for additional suction pipes. This makes them particularly well-suited as a cost-effective solution for applications with low ceilings or IBCs on racks, where vertical drum and container pumps cannot be used.
Details:
- Flexible application: easy switching between different IBCs and tanks.
- Variants: available in industrial and sanitary/food-grade versions (hygienic, easy to clean).
- Modular: Can be combined with different motors and O-ring materials for a wide range of media.
- Performance: high flow rates, low-maintenance, spare parts available.
- Explosion protection: ATEX-certified for potentially explosive atmospheres (e.g., chemical plants, refineries, distilleries).
- Connection options: Adapters allow connection to virtually any unpressurized pipeline or tank outlet.
More information about the FLUX MINIFLUX IBC pump
Which barrel pump should I use for a 1,000-liter water tank?
For 1,000-liter water tanks, for example, the FLUX F 430 TR drum pump with an electric motor is suitable—delivering up to 240 l/min for nearly complete emptying. Alternatively, MINIFLUX-type IBC pumps can be used.
For emptying a 1,000-liter IBC containing water, FLUX recommends the F 430 TR container pump. When combined with an electric motor, it achieves flow rates of up to 240 l/min and empties the tank almost completely, leaving less than 1% residual volume.
Details: The F 430 TR is a centrifugal pump from the 400 series, specifically designed for low-viscosity fluids such as water. It is operated horizontally at the IBC outlet and is ideal when access from above is not possible.
Advantages:
- High flow rate at low viscosity.
- Safe, rapid emptying even of large containers.
- Ex-rated versions available for use in potentially explosive atmospheres.
Recommended Alternatives:
- The MINIFLUX Sanitary can be used for hygienic applications.
- For high-viscosity liquids, FLUX recommends VISCOPOWER 500 Series (F 580 TR) eccentric screw pumps.
Further information:
Which pump is best suited for an IBC container?
Depending on the medium and installation situation, various FLUX pumps are suitable for emptying IBCs. Low-viscosity products are pumped using Series 400 drum pumps, while high-viscosity media are pumped using VISCOPOWER Series 500 eccentric screw pumps. If access from above is not possible, the compact MINIFLUX container pump is ideal for use at the outlet.
Overview:
- Top access: Series 400 (e.g., F 430): For low- to medium-viscosity media (up to approx. 1,200 mPas), flow rate up to 240 l/min. 500 Series (F 580): For high-viscosity products up to 80,000 mPas, also available in a mobile version.
- Outlet access: MINIFLUX: Horizontal pump for the IBC outlet, space-saving, up to 240 l/min, also available in an Ex-rated version and as the hygienic “MINIFLUX Sanitary.” Alternatively, for high-viscosity media: Series 500 (F 580 TR)
Further information: IBC solutions from FLUX (overview) MINIFLUX product page
What is a drum or container pump, and what is it used for?
FLUX drum and container pumps quickly and safely empty containers such as drums and IBCs. Depending on the model, they are suitable for chemicals, food products, hazardous areas, and viscous media.
A drum or container pump is a modular pumping system designed for the fast, safe, and nearly complete emptying of containers such as canisters, buckets, drums (60–200 L), and containers (e.g., 1,000 L IBCs). It operates on the centrifugal pump principle and, depending on the model, is designed for low- to medium-viscosity fluids, for hazardous areas, or for hygienic applications.
Operating principle: The motor drives a pump shaft with an impeller; the liquid is pumped upward from the bottom of the container. Variants with axial or semi-axial impellers enable high flow rates (up to 240 l/min) or greater head (up to 30 mWS).
Series: 300/400: Centrifugal pumps for low- to medium-viscosity fluids up to approx. 1,200 mPas.
Versions: With or without a mechanical seal (e.g., F 430 with seal, F 424 without seal). With backflow preventer (F 425) for minimal residual volumes. With mixing function (F 426) for combined pumping and mixing processes. Hygienic versions (F 427), with minimal dead space and FOOD/3A-certified.
Materials: PP, PVDF, stainless steel, Hastelloy C – selection depends on chemical resistance and application.
- Chemicals: acids, alkalis, solvents.
- Food/Cosmetics: viscous media such as honey, creams, concentrates.
- Hazardous areas: flammable liquids, ATEX-certified motors and pump tubing.
- General industry: Paints, coatings, wastewater, electroplating.
What types of drum pumps does FLUX offer?
FLUX offers drum pumps in four series: the 300 series for small quantities, the 400 series for general-purpose use, the 500 series for high-viscosity fluids, and the 600 series as the VISCOFLUX drainage system.
FLUX offers drum and container pumps in various series for different media, viscosities, and container sizes. The selection ranges from compact pumps for small volumes to specialized solutions for highly viscous or sensitive products.
Overview:
- Series 300 (JUNIORFLUX / COMBIFLUX): Compact drum pumps for smaller containers and canisters (1–60 L).
For low-viscosity media up to approx. 250 mPas. Models available with AC or battery-powered motors.
- Series 400, universal drum and container pumps: for 60–200 l drums and IBCs. For fluids up to approx. 1,200 mPas, flow rate up to 240 l/min.
Variants: seal-less (F 424), with mechanical seal (F 430), with backflow preventer (F 425), with mixing function (F 426), hygienic/low-dead-space (F 427).
- Series 500 (VISCOPOWER / Eccentric Screw Pumps): For highly viscous media up to 100,000 mPas. Also suitable for pasty, shear-sensitive, or filled products.
Variants with different motors (electric, compressed air), also suitable for mobile use.
What types of liquids can a FLUX 300 Series drum pump handle?
Short answer: A FLUX drum pump from the F 300 series (COMBIFLUX / JUNIORFLUX) is designed to pump low-viscosity liquids such as acids, alkalis, oils, and cleaning and disinfecting agents. It is designed for viscosities up to 250 mPas and densities up to 1.4, making it universally applicable in laboratories, manufacturing, agriculture, and the automotive industry.
Details:
- Fluids: non-flammable chemicals, oils, cleaning agents, and disinfectants.
- Short-term operation is also possible with slightly higher viscosities/densities.
- Materials: PP, PVDF, stainless steel, depending on chemical resistance.
- Versatile applications: laboratory, manufacturing, automotive, agriculture.
See the FLUX compatibility list for materials used in FLUX 300 Series drum pumps (COMBIFLUX / JUNIORFLUX)
What types of media can be pumped using FLUX barrel pumps?
FLUX drum pumps handle acids, alkalis, food products, cosmetics, and industrial chemicals—depending on viscosity and material compatibility.
FLUX drum and container pumps handle a wide range of media—from low-viscosity acids and alkalis to viscous food products, cosmetics, or chemicals. The chemical resistance of the materials and the viscosity of the medium are key factors.
Details:
- Chemical media: Acids (e.g., hydrochloric, sulfuric, phosphoric, boric acid), alkalis (e.g., sodium hydroxide, ammonia water), oxidizing agents (e.g., sodium hypochlorite), solvents, and cleaning agents.
- Food and cosmetics: Fruit juices, dairy products, syrups, creams, shampoos, or lotions—depending on hygiene standards, with low-dead-space, FOOD/3A-certified pumps (e.g., F 427).
- Industrial products: Paints, varnishes, oils, lubricants, electroplating electrolytes.
Limitations:
- Centrifugal pumps of the 300/400 series: suitable up to approx. 1,200 mPas.
- 500 Series eccentric screw pumps: up to 100,000 mPas.
Selection depends on chemical resistance (materials: PP, PVDF, stainless steel, Hastelloy C; seals: NBR, EPDM, FKM, FFKM).
Note: Exact suitability depends on the composition, temperature, and viscosity of the fluid. To ensure safety, FLUX recommends verifying suitability using the compatibility list and, if necessary, conducting on-site tests.
Need advice on Drum and container pumps?
Our specialists help you choose the right pump for your medium. Get in touch or let us call you back.



























