FLUX Pompen Benelux logo
Back to overview
Drum and container pumps

F 426

for mixing and/or pumping out of drums. Made from stainless steel, FKM seal.

  • ATEX

Available in 6 versions

Choose a version
Max. flow rate
240 l/min
Max. discharge head
13 mWk
Material
Stainless steel, Polypropylene

Versions

6 versions. Choose a version to see its article number and request a quote for exactly that article.

For use in hazardous areas

Material

Immersion length

  • PP-50/33 | FKM

    10-42640001

    For use in hazardous areas
    No
    Material
    Polypropylene
    Immersion length
    1,000 mm
    Max. viscosity
    1,200 mPas
    Weight
    1.8 kg

  • PP-50/33 | FKM

    10-42640002

    For use in hazardous areas
    No
    Material
    Polypropylene
    Immersion length
    1,200 mm
    Max. viscosity
    1,200 mPas
    Weight
    2.1 kg

  • S-41/38 | FFKM

    10-42629010

    For use in hazardous areas
    Yes
    Material
    Stainless steel
    Immersion length
    1,000 mm
    Max. viscosity
    900 mPas
    Weight
    3.78 kg

  • S-41/38 | FFKM

    10-42629012

    For use in hazardous areas
    Yes
    Material
    Stainless steel
    Immersion length
    1,200 mm
    Max. viscosity
    900 mPas
    Weight
    4.4 kg

  • S-41/38 | FKM

    10-42620010

    For use in hazardous areas
    Yes
    Material
    Stainless steel
    Immersion length
    1,000 mm
    Max. viscosity
    900 mPas
    Weight
    3.79 kg

  • S-41/38 | FKM

    10-42620012

    For use in hazardous areas
    Yes
    Material
    Stainless steel
    Immersion length
    1,200 mm
    Max. viscosity
    900 mPas
    Weight
    4.29 kg

Overview

The F 426 drum pump (with mechanical seal to cover inner tube; immersion length 1000 mm) is ideal for mixing and/or pumping inhomogeneous media. Media, which are prone to rapid separation, can therefore be kept in motion even during the pumping process. If the outlet is closed, e.g. by a pump nozzle, the F 426 drum pump can also be temporarily run as a pure mixing pump. The transition between "Mix" and "Pump" is performed very easily by turning an adjusting lever. There are two adjusting levers for opening and closing the mixing apertures with ease. The mixing apertures allow the medium to flow back into the container for mixing. The drum pump is easy to disassemble for cleaning. The drum pump is made from stainless steel and can also be used in areas subject to explosion hazards for liquids with an electrical conductivity of more than 10,000 pS/m. If necessary, the pump assembly can also be combined with different motors.

Benefits

  • 3 operating modes in one pump:
  • The operating mode can be changed during operation
  • Easy to dismantle for cleaning
  • Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
  • Stainless steel version also for use in areas subject to explosion hazards

Technical data

Performance

Max. flow rate
240 l/min
Max. discharge head
13 mWk

Materials and sealing

Material impeller
ethylene tetrafluoroethylene

Dimensions and weight

Connection outlet
External thread G 1 1/4"

Approvals

3-A version
No
FDA approval
no
Food approval
no

Other

Drum pump type
F 426

Media

This product is suitable for 310 media. The list is a guide for common applications.

A

Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.

Downloads

Data sheets

Manuals

Declarations of conformity

Drawings and diagrams

Inquiry forms

Other documents

Need advice on F 426?

Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.