ATEX
Available in 3 versions
Choose a version- Motor type
- FEM 4070
- Max. flow rate
- 60–240 l/min
- Max. discharge head
- 9–13 mWk
- Rated output
- 0.5 kW
- Supply voltage
- 230-240 V
- Material
- Stainless steel, Polypropylene
Versions
3 versions. Choose a version to see its article number and request a quote for exactly that article.
For use in hazardous areas
Max. flow rate
Max. discharge head
| Version | Item no. | For use in hazardous areas | Motor type | Max. flow rate | Max. discharge head | Rated output | Choose |
|---|---|---|---|---|---|---|---|
| S-41/38 | FFKM | 136 mm | 10-43029003 | Yes | – | 240 l/min | 13 mWk | – | |
| S-41/38 | FKM | 136 mm | 10-43020003 | Yes | – | 240 l/min | 13 mWk | – | |
| S-41/38-136 | 10-40729000 | No | FEM 4070 | 60 l/min | 9 mWk | 0.5 kW |
S-41/38 | FFKM | 136 mm
10-43029003
- For use in hazardous areas
- Yes
- Max. flow rate
- 240 l/min
- Max. discharge head
- 13 mWk
S-41/38 | FKM | 136 mm
10-43020003
- For use in hazardous areas
- Yes
- Max. flow rate
- 240 l/min
- Max. discharge head
- 13 mWk
S-41/38-136
10-40729000
- For use in hazardous areas
- No
- Motor type
- FEM 4070
- Max. flow rate
- 60 l/min
- Max. discharge head
- 9 mWk
- Rated output
- 0.5 kW
Overview
Fully-prepared pump kit for emptying IBCs (with standard S60x6 thread) via their outlet. The MINIFLUX is intended as an alternative to vertical drum pumps for cases where IBCs can only be accessed from above with great difficulty if at all. It is also ideal if the medium’s natural outlet via the outlet tap does not provide sufficient pumping pressure for filling at speed or transferring to a container at a higher level, for example. The MINIFLUX is driven by a commutator motor. The light pump with its compact design (total weight of 1.2 kg) does not have to be raised up to the container and can be simply connected to the outlet using a union nut. It can be disassembled into two parts via the clamp.
Benefits
- Can also be used in locations with low ceilings
- When IBCs are stacked one on top of another, also allows pumping from the bottom outlet
- Considerably higher flow rate and pumping pressure compared with filling at the outlet tap using the hydrostatic pressure of the medium
- Low overall space requirement
- Easy to remove from IBC via union nut
Technical data
Performance
- Max. viscosity
- 1,000 mPas
Materials and sealing
- Material impeller
- ethylene tetrafluoroethylene
- Material shaft
- stainless steel
Other
- Drum pump type
- F 430
Media
This product is suitable for 246 media. The list is a guide for common applications.
A
- Acetic acid10% · 20 °C
- Acetic acid10% · 40 °C
- Acetic acid25% · 20 °C
- Acetic acid25% · 40 °C
- Acetic acid50% · 20 °C
- Acetone10% · 20 °C
- Acetone10% · 40 °C
- Acetone100% · 20 °C
- Acetone100% · 40 °C
- Allyl alcohol96% · 20 °C
- Allyl alcohol96% · 40 °C
- Ammonia solution100% · 20 °C
- Ammonia solution100% · 40 °C
- Ammonium nitrate10% · 20-40 °C
- Ammonium nitrate50% · 20-40 °C
- Ammonium phosphate10% · 20-40 °C
- Ammonium sulphate10% · 20 °C
- Ammonium sulphate10% · 40 °C
- Amyl acetate100% · 20 °C
- Amyl acetate100% · 40 °C
- Amyl alcohol100% · 20 °C
- Amyl alcohol100% · 40 °C
- Arsenic acid10% · 20-40 °C
- Arsenic acid80% · 20-40 °C
Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.
Downloads
Data sheets
Manuals
Declarations of conformity
Drawings and diagrams
Inquiry forms
Other documents
Similar products
- Variants available
Drum and container pumps
MINIFLUX Sanitary
Horizontal IBC container pump for hygienic applications—FDA conform, tool-free disassembly, less than one percent residual volume.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
- Variants available
Drum and container pumps
F 310
with permanently fitted motor, for pumping out of drums, made from polypropylene, with mechanical seal, FKM seal.
- Motor type:
- F 310
- Max. flow rate:
- 48 l/min
- Max. discharge head:
- 6.9 mWk
- Rated output:
- 0.23 kW
- Variants available
Drum and container pumps
F 314
for small fill quantities out of drums, with a permanently attached motor.
- Motor type:
- F 310
- Max. flow rate:
- 56 l/min
- Max. discharge head:
- 8.5 mWk
- Rated output:
- 0.23 kW
- Variants available
Drum and container pumps
F 427
For mobile transfer and dispensing of food and pharmaceutical products from 200-litre drums.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
- Variants available
Drum and container pumps
FP 425 Ex
for 99.98 % container emptying.
- Motor type:
- F 460 Ex
- Max. flow rate:
- 40–220 l/min
- Max. discharge head:
- 8–26 mWk
- Rated output:
- 0.46 kW
- Variants available
Drum and container pumps
F 430
for pumping petroleum products out of drums.
- Max. flow rate:
- 100–240 l/min
- Max. discharge head:
- 13–32 mWk
- Material:
- Aluminium, Stainless steel, Polypropylene, Polyvinylidene fluoride
- Variants available
Drum and container pumps
F 424
for filling Adblue® from IBCs.
- Max. flow rate:
- 100–240 l/min
- Max. discharge head:
- 13–30 mWk
- Material:
- Polypropylene, Polyvinylidene fluoride
- Variants available
Drum and container pumps
FP 424 Ex
for pumping highly flammable media out of drums with compressed air motor.
- Max. flow rate:
- 120–240 l/min
- Max. discharge head:
- 13–30 mWk
- Material:
- Stainless steel
Need advice on MINIFLUX?
Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.