F 430 S-41/38 | FKM
for pumping a huge range of media out of IBCs, with compressed air motor.
- Item no.
- 10-41620012
- EAN
- 4260387213295
ATEX
- Motor type
- F 416 Ex
- Max. flow rate
- 50 l/min
- Max. discharge head
- 13 mWk
- Rated output
- 0.47 kW
- Material
- Stainless steel
Overview
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1200 mm) with mechanical seal outer tube, stainless steel outer tube, hose line, pump nozzle and compression gland. The drum pump is driven by the F 416 compressed air motor. The pump can be disassembled into two parts without any tools.
Benefits
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
Technical data
Performance
- Max. flow rate
- 50 l/min
- Max. discharge head
- 13 mWk
- Max. viscosity
- 800 mPas
Electrical
- Rated output
- 0.47 kW
- Speed control
- via supply air
- Motor type
- F 416 Ex
Materials and sealing
- Material impeller
- ethylene tetrafluoroethylene
- Seal material
- FKM, FEP/PTFE
- Material
- Stainless steel
- Material shaft
- stainless steel
- Mechanical seal
- PTFE/carbon, oxide ceramics, S, FKM
- Type hose line
- universal hose
Dimensions and weight
- Weight
- 8.7 kg
- Immersion length
- 1,200 mm
- Outer diameter
- 31 mm
- Hose length from
- 2,0 m
- Nominal diameter
- DN 21 mm
Approvals
- Ex marking
- Ex II 2G Ex h IIC T6 Gb
- For use in hazardous areas
- Yes
Other
- Drum pump type
- F 430
- Ø outlet spout
- 28 mm
Set components
Hand Nozzles
Performance
- Operating pressure
- 6 bar
Materials and sealing
- Inliner
- yes
- Material inside
- Fluoropolymer THV seamless
Approvals
- Ex marking
- Ex II 1/2 G Ex h IIB T4 Ga/Gb
Other
- Swivelling
- yes
- Base part
- 41 mm
- Shaft bearing
- slide bearing - not in contact with the medium
- Air consumption
- 14 l/s
Compare the versions
Only the properties that differ are shown.
| Property | F 430 S-41/38 | FKM | F 430 S-41/38 | FKMThis page |
|---|---|---|
| Item no. | 10-41620010 | 10-41620012 |
| Immersion length | 1,000 mm | 1,200 mm |
| Weight | 8.2 kg | 8.7 kg |
| Mechanical seal | PTFE/carbon, oxide ceramics, HC, FKM | PTFE/carbon, oxide ceramics, S, FKM |
Media
This product is suitable for 106 media. The list is a guide for common applications.
A
- Ammonium nitrate10% · 20-40 °C
- Ammonium nitrate50% · 20-40 °C
- Ammonium phosphate10% · 20-40 °C
- Ammonium sulphate10% · 20 °C
- Ammonium sulphate10% · 40 °C
- Amyl alcohol100% · 20 °C
- Arsenic acid10% · 20-40 °C
- Arsenic acid80% · 20-40 °C
B
- Benzine100% · 20 °C
- Benzine100% · 40 °C
- Bicarbonate of soda10% · 20 °C
- Bicarbonate of soda10% · 40 °C
- Borax10% · 20-40 °C
- Borax100% · 20-40 °C
- Boric acid10% · 20-40 °C
- Boric acid100% · 20-40 °C
- Butanedioic acid50% · 20-40 °C
- Butanol100% · 20 °C
- Butyl alcohol100% · 20 °C
- Butylene glycol10% · 20-40 °C
C
- Calcium chloride10% · 20-40 °C
- Calcium chloride100% · 20-40 °C
- Calcium hydroxide15% · 20 °C
- Calcium hydroxide15% · 40 °C
Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.
Downloads
Data sheets
Manuals
Declarations of conformity
Drawings and diagrams
Inquiry forms
Other documents
Accessories and related
Accessories
Pump bracket
for drum and container pumps.
- Material:
- Stainless steel
Accessories
Screw cap
for IBCs, DN 150
- Material:
- Polypropylene
Accessories
Screw cap
for IBCs, DN 225
- Material:
- Polypropylene
- Variants available
F 300 - for small filling quantities
F 430 AL-41/38
for pumping petroleum products out of drums.
- Motor type:
- FEM 4070
- Max. flow rate:
- 65 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 300 - for small filling quantities
F 430 PP-40/33
for pumping acids and alkalis out of IBCs. Pump with mechanical seal.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.41 kW
F 300 - for small filling quantities
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Rated output:
- 0.5 kW
- Supply voltage:
- 230-240 V
- Material:
- Polypropylene
F 300 - for small filling quantities
F 424 PP-41/36
for pumping acids and alkalis out of IBCs. Sealless pump.
- Motor type:
- FEM 4070
- Max. flow rate:
- 60 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 300 - for small filling quantities
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 18 mWk
- Rated output:
- 0.5 kW
Need advice on F 430 S-41/38 | FKM?
Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.