Suitable medium
Pumps for Calcium hydroxide, 15%, 40 °C
65 FLUX pumps are suitable for Calcium hydroxide, 15%, 40 °C. Compare them below by type, material, flow rate and head.
- Concentration
- 15%
- Temperature
- 40 °C
Suitable pumps
F 500 - for high viscosity media
VISCOPOWER F 570 FKMo R33
for pumping viscous media of up to 30,000 mPas out of IBCs, for industrial applications.
- Motor type:
- F 457
- Max. flow rate:
- 21 l/min
- Max. discharge head:
- 40 mWk
- Rated output:
- 0.8 kW
F 500 - for high viscosity media
VISCOPOWER F 570 FKMc R33
for pumping viscous media of up to 25,000 mPas out of drums, for pharmaceutical and FOOD applications.
- Motor type:
- F 458-1
- Max. flow rate:
- 19 l/min
- Max. discharge head:
- 40 mWk
- Rated output:
- 0.7 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 S-41/38 | FKM
for pumping a huge range of media out of drums, with compressed air motor.
- Motor type:
- F 416 Ex
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 13 mWk
- Rated output:
- 0.47 kW
F 400 - for low viscosity media-from drums or IBCs
FP 427 S-43/38 FOOD | FKM
for pumping food and pharmaceutical products out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 8 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 PVDF-40/33
for pumping concentrated acids out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
FP 430 Ex S-41/38 FOOD | FKM
for pumping food and pharmaceutical products out of drums in areas subject to explosion hazards.
- Motor type:
- F 460 Ex
- Max. flow rate:
- 60 l/min
- Max. discharge head:
- 9 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
FP 425 Ex S-41/34
for 99.98 % container emptying.
- Motor type:
- F 460 Ex
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 8 mWk
- Rated output:
- 0.46 kW
F 500 - for high viscosity media
VISCOPOWER F 570 FKMo R52
for the fire brigade to pump viscous media of up to 25,000 mPas out of drums and IBCs.
- Motor type:
- F 458-1
- Max. flow rate:
- 19 l/min
- Max. discharge head:
- 40 mWk
- Rated output:
- 0.7 kW
Drum and container pumps
F 427 S3A-43/38
for hygiene applications. For pumping out of drums. Made from stainless steel.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 427 S3-43/38 | G 1¼ A
for hygiene applications. For pumping out of drums. Made from stainless steel, G 1¼ A pressure connector.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 427 S4-43/38 | Rd 58x1/6
for hygiene applications. For pumping out of drums. Made from stainless steel, Rd 58x1/6 pressure connector.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 427 S-43/38 FOOD
for hygiene applications. For pumping out of drums. Made from stainless steel, 1 1/2" clamp pressure connector.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 430 Ex S-41/38 FOOD | FFKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/37 Z | FKM
sealless, for pumping out of drums. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 160 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-50/45 Z | FKM
sealless, for pumping out of IBCs. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/38 | EPDM
sealless, for pumping out of drums. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 | EPDM
with mechanical seal, for pumping out of drums. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/38 | FEP
sealless, for pumping out of drums. Made from stainless steel, FEP seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 | FFKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/37 Z | FEP
sealless, for pumping out of canisters. Made from stainless steel, FEP seal, semi-axial rotor.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-50/45 Z | FEP
sealless, for pumping out of IBCs. Made from stainless steel, FEP seal, semi-axial rotor.
- Max. flow rate:
- 160 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 PP-40/33 TR | FKM
for horizontal use (dry well installation), made from polypropylene, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 424 PP-41/36 | FKM
sealless, for pumping out of drums. Made from polypropylene, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PP-40/33 | FKM
with mechanical seal, for pumping out of drums. Made from polypropylene, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 424 PP-41/35 Z | FKM
sealless, for pumping out of drums. Made from polypropylene, FKM seal, semi-axial rotor.
- Max. flow rate:
- 100 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PP-50/43 Z | FKM
with mechanical seal, for pumping out of drums. Made from polypropylene, FKM seal, semi-axial rotor.
- Max. flow rate:
- 110 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 S-50/45 Z | FKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 160 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 | FKM
for 99.98 % residual & drum emptying. Made from stainless steel, FKM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 | FKM
for 99.98 % residual & container emptying. Made from stainless steel, FKM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 | FKM
for 99.98 % residual & canister emptying. Made from stainless steel, FKM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 Z | FKM
for 99.98 % residual & container emptying. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 80 l/min
- Max. discharge head:
- 26 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 Z | FKM
for 99.98 % residual & drum emptying. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 80 l/min
- Max. discharge head:
- 26 mWk
- Material:
- Stainless steel
Flow Meter
FMC 100/S/PPS/2/A | FKM
Nutating disc flowmeter, for use with drum pumps, made from PPS, FKM seal.
- Material:
- Stainless steel
Flow Meter
FMO 110/S/S/1
Oval gear flowmeter, for use with drum pumps, stainless steel, up to 1,000 mPas.
- Material:
- Stainless steel
Flow Meter
FMT 120 PP/GF | PTFE
Turbine-type meter, G 1 intake connecting thread, made from polypropylene
- Material:
- Polypropylene
Flow Meter
FMT 120 PP/GF | PTFE
Turbine-type meter, G 1 ¼ intake connecting thread, made from polypropylene
- Material:
- Polypropylene
Flow Meter
FLUXTRONIC® evaluation electronics
no control cable, for FMC, FMO 104, FMO 110 as well as VISCOPOWER F 580 with motor flange and integrated pulse generator
View product
Drum and container pumps
F 430 PP-50/38 | FKM
with mechanical seal, for pumping out of drums. Made from polypropylene, FKM seal, 50 mm diameter.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 S-41/37 Z | FKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FKM seal, semi-axial rotor.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 PP-40/33 Z | FKM
with mechanical seal, for pumping out of drums. Made from polypropylene, FKM seal, semi-axial rotor.
- Max. flow rate:
- 100 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PP-40/33 | EPDM
with mechanical seal, for pumping out of drums. Made from polypropylene, EPDM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PP-100/50 | FKM
with mechanical seal for pumping out of open drums. Made from polypropylene, with impeller.
- Max. flow rate:
- 110 l/min
- Max. discharge head:
- 32 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PVDF-40/33 | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PP-50/38 | FKM
sealless, for pumping out of drums. Made from polypropylene, FKM seal, 50 mm diameter.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PVDF-50/43 Z | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, semi-axial rotor.
- Max. flow rate:
- 110 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PP-50/43 Z | FKM
sealless, for pumping out of drums. Made from polypropylene, FKM seal, semi-axial rotor.
- Max. flow rate:
- 125 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PVDF-50/38 | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, 50 mm diameter.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 430 PVDF-40/33 Z | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, semi-axial rotor.
- Max. flow rate:
- 100 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PP-41/36 | EPDM
sealless, for pumping the same media every time. Made from polypropylene, shaft made from Hastelloy C.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PVDF-40/33 | FFKM
with mechanical seal, for pumping out of canisters. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PVDF-41/36 | FKM
sealless, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 310 PP-32/25 | FKM
with permanently fitted motor, for pumping out of drums, made from polypropylene, with mechanical seal, FKM seal.
- Motor type:
- F 310
- Max. flow rate:
- 48 l/min
- Max. discharge head:
- 6.9 mWk
- Rated output:
- 0.23 kW
Drum and container pumps
MINIFLUX S-41/38 | FFKM | 136 mm
for horizontal use on the IBC. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
MINIFLUX S-41/38 | FKM | 136 mm
for horizontal use on the IBC. Made from stainless steel, FKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 TR | FKM
for horizontal use (dry well installation), made from stainless steel, FKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 TR | FEP/FFKM
for horizontal use (dry well installation), made from stainless steel, FEP/FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-50/38 | FKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FKM seal, 50 mm diameter.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 424 PVDF-41/36 | FFKM
sealless, for pumping out of drums. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
FP 425 Ex S-41/34 | EPDM
for 99.98 % residual & drum emptying. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 | FFKM
for 99.98 % residual & drum emptying. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 425 PP-50/34 | FKM
for 99.98 % residual & drum emptying. Made from polypropylene, FKM seal, 50 mm diameter.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 12 mWk
- Material:
- Polypropylene
Drum and container pumps
F 425 PP-50/34 | EPDM
for 99.98 % residual & container emptying. Made from polypropylene, EPDM seal, 50 mm diameter.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 12 mWk
- Material:
- Polypropylene
Drum and container pumps
F 426 S-41/38 | FKM
for mixing and/or pumping out of drums. Made from stainless steel, FKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 426 S-41/38 | FFKM
for mixing and/or pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 426 PP-50/33 | FKM
for mixing and/or pumping out of drums. Made from polypropylene, FKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Compare the suitable pumps
Click a column heading to sort.
| Pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| VISCOPOWER F 570 FKMo R33 | – | Stainless steel | FKM | 21 l/min | 40 mWk | 30,000 mPas | 1,200 mm | No | no |
| VISCOPOWER F 570 FKMc R33 | – | Stainless steel | FKM | 19 l/min | 40 mWk | 25,000 mPas | 1,000 mm | No | EC 1935/2004 |
| F 430 S-41/38 | FKM | F 430 | Stainless steel | FKM, FEP/PTFE | 50 l/min | 13 mWk | 800 mPas | 1,000 mm | Yes | – |
| FP 427 S-43/38 FOOD | FKM | FP 427 | Stainless steel | FKM, PTFE/FKM | 50 l/min | 8 mWk | 1,000 mPas | 1,000 mm | No | EC 1935/2004 |
| F 430 PVDF-40/33 | F 430 | Polyvinylidene fluoride | FKM | 40 l/min | 9.5 mWk | 600 mPas | 1,000 mm | No | no |
| FP 430 Ex S-41/38 FOOD | FKM | FP 430 | Stainless steel | FKM, PTFE/FKM | 60 l/min | 9 mWk | 1,200 mPas | 1,000 mm | Yes | EC 1935/2004 |
| FP 425 Ex S-41/34 | FP 425 | Stainless steel | FKM, FEP/PTFE | 40 l/min | 8 mWk | 600 mPas | 1,200 mm | Yes | no |
| VISCOPOWER F 570 FKMo R52 | – | Stainless steel | FKM | 19 l/min | 40 mWk | 25,000 mPas | 1,200 mm | No | no |
| F 427 S3A-43/38 | F 427 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 427 S3-43/38 | G 1¼ A | F 427 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 427 S4-43/38 | Rd 58x1/6 | F 427 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| FP 427 S-43/38 FOOD | FP 427 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | EC 1935/2004 |
| FP 430 Ex S-41/38 FOOD | FFKM | FP 430 | Stainless steel | FFKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | EC 1935/2004 |
| FP 424 Ex S-43/37 Z | FKM | FP 424 | Stainless steel | FKM | 160 l/min | 24 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FP 424 Ex S-50/45 Z | FKM | FP 424 | Stainless steel | FKM | 240 l/min | 30 mWk | 1,200 mPas | 1,200 mm | Yes | no |
| FP 424 Ex S-43/38 | EPDM | FP 424 | Stainless steel | EPDM | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 430 S-41/38 | EPDM | F 430 | Stainless steel | EPDM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | no |
| FP 424 Ex S-43/38 | FEP | FP 424 | Stainless steel | FEP | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 430 S-41/38 | FFKM | F 430 | Stainless steel | FEP/FFKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | no |
| FP 424 Ex S-43/37 Z | FEP | FP 424 | Stainless steel | FEP | 120 l/min | 24 mWk | 1,200 mPas | 700 mm | Yes | no |
| FP 424 Ex S-50/45 Z | FEP | FP 424 | Stainless steel | FEP | 160 l/min | 30 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| F 430 PP-40/33 TR | FKM | F 430 | Polypropylene | FKM | 205 l/min | 13 mWk | 1,200 mPas | – | No | no |
| F 424 PP-41/36 | FKM | F 424 | Polypropylene | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PP-40/33 | FKM | F 430 | Polypropylene | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PP-41/35 Z | FKM | F 424 | Polypropylene | FKM | 100 l/min | 24 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PP-50/43 Z | FKM | F 430 | Polypropylene | FKM | 110 l/min | 30 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 S-50/45 Z | FKM | F 430 | Stainless steel | FKM | 160 l/min | 30 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FP 425 Ex S-41/34 | FKM | FP 425 | Stainless steel | FKM | 220 l/min | 13 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FP 425 Ex S-41/34 | FKM | FP 425 | Stainless steel | FKM | 220 l/min | 13 mWk | 1,200 mPas | 1,200 mm | Yes | no |
| FP 425 Ex S-41/34 | FKM | FP 425 | Stainless steel | FKM | 220 l/min | 13 mWk | 1,200 mPas | 700 mm | Yes | no |
| FP 425 Ex S-41/34 Z | FKM | FP 425 | Stainless steel | FKM | 80 l/min | 26 mWk | 1,200 mPas | 1,200 mm | Yes | no |
| FP 425 Ex S-41/34 Z | FKM | FP 425 | Stainless steel | FKM | 80 l/min | 26 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FMC 100/S/PPS/2/A | FKM | – | Stainless steel | FEP with FKM core | – | – | 2,500 mPas | – | Yes | no |
| FMO 110/S/S/1 | – | Stainless steel | FKM | – | – | 1,000 mPas | – | Yes | EC 1935/2004 |
| FMT 120 PP/GF | PTFE | – | Polypropylene | PTFE | – | – | 40 mPas | – | No | no |
| FMT 120 PP/GF | PTFE | – | Polypropylene | PTFE | – | – | 40 mPas | – | No | no |
| FLUXTRONIC® evaluation electronics | – | – | – | – | – | – | – | – | – |
| F 430 PP-50/38 | FKM | F 430 | Polypropylene | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 430 S-41/37 Z | FKM | F 430 | Stainless steel | FKM | 120 l/min | 24 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| F 430 PP-40/33 Z | FKM | F 430 | Polypropylene | FKM | 100 l/min | 24 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PP-40/33 | EPDM | F 430 | Polypropylene | EPDM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PP-100/50 | FKM | F 430 | Polypropylene | FKM | 110 l/min | 32 mWk | 150 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 | FKM | F 430 | Polyvinylidene fluoride | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PP-50/38 | FKM | F 424 | Polypropylene | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 430 PVDF-50/43 Z | FKM | F 430 | Polyvinylidene fluoride | FKM | 110 l/min | 30 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PP-50/43 Z | FKM | F 424 | Polypropylene | FKM | 125 l/min | 30 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-50/38 | FKM | F 430 | Polyvinylidene fluoride | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 Z | FKM | F 430 | Polyvinylidene fluoride | FKM | 100 l/min | 24 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PP-41/36 | EPDM | F 424 | Polypropylene | EPDM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 | FFKM | F 430 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PVDF-41/36 | FKM | F 424 | Polyvinylidene fluoride | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 310 PP-32/25 | FKM | F 310 | Polypropylene, polyamide | FKM | 48 l/min | 6.9 mWk | 250 mPas | 1,000 mm | No | – |
| MINIFLUX S-41/38 | FFKM | 136 mm | F 430 | Stainless steel | FFKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| MINIFLUX S-41/38 | FKM | 136 mm | F 430 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| F 430 S-41/38 TR | FKM | F 430 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| F 430 S-41/38 TR | FEP/FFKM | F 430 | Stainless steel | FEP/FFKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| F 430 S-50/38 | FKM | F 430 | Stainless steel | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | no |
| F 424 PVDF-41/36 | FFKM | F 424 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| FP 425 Ex S-41/34 | EPDM | FP 425 | Stainless steel | EPDM | 220 l/min | 13 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FP 425 Ex S-41/34 | FFKM | FP 425 | Stainless steel | FFKM | 220 l/min | 13 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| F 425 PP-50/34 | FKM | F 425 | Polypropylene | FKM | 120 l/min | 12 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 425 PP-50/34 | EPDM | F 425 | Polypropylene | EPDM | 120 l/min | 12 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 426 S-41/38 | FKM | F 426 | Stainless steel | FKM | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 426 S-41/38 | FFKM | F 426 | Stainless steel | FFKM | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 426 PP-50/33 | FKM | F 426 | Polypropylene | FKM | 240 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
Suitability applies at the stated concentration and temperature. Unsure about your application? Our specialists are happy to advise.