F 430 S-41/38 | FKM
for pumping a huge range of media out of drums, with compressed air motor.
- Item no.
- 10-41620010
- EAN
- 4260387213288
ATEX
- Motor type
- F 416 Ex
- Max. flow rate
- 50 l/min
- Max. discharge head
- 13 mWk
- Rated output
- 0.47 kW
- Material
- Stainless steel
Overview
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1000 mm) with mechanical seal outer tube, stainless steel outer tube, hose line, pump nozzle and compression gland. The drum pump is driven by the F 416 compressed air motor. The pump can be disassembled into two parts without any tools.
Benefits
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
Technical data
Performance
- Max. flow rate
- 50 l/min
- Max. discharge head
- 13 mWk
- Max. viscosity
- 800 mPas
Electrical
- Rated output
- 0.47 kW
- Speed control
- via supply air
- Motor type
- F 416 Ex
Materials and sealing
- Seal material
- FKM, FEP/PTFE
- Material
- Stainless steel
- material impeller
- ethylene tetrafluoroethylene
- material shaft
- stainless steel
- mechanical seal
- PTFE/carbon, oxide ceramics, HC, FKM
- type hose line
- universal hose
Dimensions and weight
- Weight
- 8.2 kg
- Immersion length
- 1,000 mm
- outer diameter
- 31 mm
- hose length from
- 2,0 m
- nominal diameter
- DN 21 mm
Approvals
- Ex marking
- Ex II 2G Ex h IIC T6 Gb
- For use in hazardous areas
- Yes
Other
- Drum pump type
- F 430
- Ø outlet spout
- 28 mm
Set components
Hand Nozzles
Performance
- operating pressure
- 6 bar
Materials and sealing
- Inliner
- yes
- material inside
- Fluoropolymer THV seamless
Approvals
- Ex marking
- Ex II 1/2 G Ex h IIB T4 Ga/Gb
Other
- swivelling
- yes
- base part
- 41 mm
- shaft bearing
- slide bearing - not in contact with the medium
- air consumption
- 14 l/s
Media
This product is suitable for 106 media. The list is a guide for common applications.
A
- Ammonium nitrate10% · 20-40 °C
- Ammonium nitrate50% · 20-40 °C
- Ammonium phosphate10% · 20-40 °C
- Ammonium sulphate10% · 20 °C
- Ammonium sulphate10% · 40 °C
- Amyl alcohol100% · 20 °C
- Arsenic acid10% · 20-40 °C
- Arsenic acid80% · 20-40 °C
B
- Benzine100% · 20 °C
- Benzine100% · 40 °C
- Bicarbonate of soda10% · 20 °C
- Bicarbonate of soda10% · 40 °C
- Borax10% · 20-40 °C
- Borax100% · 20-40 °C
- Boric acid10% · 20-40 °C
- Boric acid100% · 20-40 °C
- Butanedioic acid50% · 20-40 °C
- Butanol100% · 20 °C
- Butyl alcohol100% · 20 °C
- Butylene glycol10% · 20-40 °C
C
- Calcium chloride10% · 20-40 °C
- Calcium chloride100% · 20-40 °C
- Calcium hydroxide15% · 20 °C
- Calcium hydroxide15% · 40 °C
Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.
Downloads
Data sheets
Manuals
Declarations of conformity
Drawings and diagrams
Inquiry forms
Other documents
Similar products
F 400 - for low viscosity media-from drums or IBCs
F 430 PP-40/33
for pumping acids and alkalis out of IBCs. Pump with mechanical seal.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.41 kW
F 400 - for low viscosity media-from drums or IBCs
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Rated output:
- 0.5 kW
- Supply voltage:
- 230-240 V
- Material:
- Polypropylene
F 400 - for low viscosity media-from drums or IBCs
F 424 PP-41/36
for pumping acids and alkalis out of IBCs. Sealless pump.
- Motor type:
- FEM 4070
- Max. flow rate:
- 60 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 400 - for low viscosity media-from drums or IBCs
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 18 mWk
- Rated output:
- 0.5 kW
F 400 - for low viscosity media-from drums or IBCs
FP 424 Ex S-43/38 | FKM
for pumping highly flammable media out of drums with compressed air motor.
- Motor type:
- F 416 Ex
- Max. flow rate:
- 0 l/min
- Max. discharge head:
- 0 mWk
- Rated output:
- 0.47 kW
F 400 - for low viscosity media-from drums or IBCs
FP 427 S-43/38 FOOD | FKM
for pumping food and pharmaceutical products out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 8 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 PVDF-40/33
for pumping concentrated acids out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 AL-41/38
for pumping petroleum products out of drums.
- Motor type:
- FEM 4070
- Max. flow rate:
- 65 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
Need advice on F 430 S-41/38 | FKM?
Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.