F 425 / FP 425
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.
Request an offer or let our sales team call you about F 425 / FP 425.
Benefits
- Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum
- No tilting to totally empty the drum
- Reduction of cleaning and waste disposal costs
- No loss of medium when taking the pump from drum to drum
- Optimal use of fluids
- Unique, only at FLUX: the inner tube reinforced by a metal core at the PP version. It prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges.
- Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
- Stainless steel and hastelloy C version can be used in hazardous areas
Technical details at a glance
- Flow rate: max. 120 l/min1
- Delivery head: max. 26 mwc2
- Viscosity: min. 1 mPas - max. 1200 mPas2
- Outer tube diameter: min. 41 mm3 - max. 50 mm3
- Immersion length: 700, 1000, 1200
- Materials outer tube:
- Media / Fluids:
- Seal: with mechanical seal
- Container:
1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
2 dependent on pump model, motor and medium
3 dependent on pump model
Suitable motors
What can we do for you?
Would you like advice without obligation? Then make an appointment with one of our specialists using the form on the contact page.