Suitable medium
Pumps for Hydrogen peroxide, 3%, 40 °C
17 FLUX pumps are suitable for Hydrogen peroxide, 3%, 40 °C. Compare them below by type, material, flow rate and head.
- Concentration
- 3%
- Temperature
- 40 °C
Suitable pumps
Drum and container pumps
FP 430 Ex S-41/38 FOOD | FFKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/38 | EPDM
sealless, for pumping out of drums. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 | EPDM
with mechanical seal, for pumping out of drums. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/38 | FEP
sealless, for pumping out of drums. Made from stainless steel, FEP seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 | FFKM
with mechanical seal, for pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-43/37 Z | FEP
sealless, for pumping out of canisters. Made from stainless steel, FEP seal, semi-axial rotor.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 424 Ex S-50/45 Z | FEP
sealless, for pumping out of IBCs. Made from stainless steel, FEP seal, semi-axial rotor.
- Max. flow rate:
- 160 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 PP-40/33 | EPDM
with mechanical seal, for pumping out of drums. Made from polypropylene, EPDM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 424 PP-41/36 | EPDM
sealless, for pumping the same media every time. Made from polypropylene, shaft made from Hastelloy C.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polypropylene
Drum and container pumps
F 430 PVDF-40/33 | FFKM
with mechanical seal, for pumping out of canisters. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
MINIFLUX S-41/38 | FFKM | 136 mm
for horizontal use on the IBC. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 430 S-41/38 TR | FEP/FFKM
for horizontal use (dry well installation), made from stainless steel, FEP/FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 424 PVDF-41/36 | FFKM
sealless, for pumping out of drums. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
FP 425 Ex S-41/34 | EPDM
for 99.98 % residual & drum emptying. Made from stainless steel, EPDM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
FP 425 Ex S-41/34 | FFKM
for 99.98 % residual & drum emptying. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 220 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Drum and container pumps
F 425 PP-50/34 | EPDM
for 99.98 % residual & container emptying. Made from polypropylene, EPDM seal, 50 mm diameter.
- Max. flow rate:
- 120 l/min
- Max. discharge head:
- 12 mWk
- Material:
- Polypropylene
Drum and container pumps
F 426 S-41/38 | FFKM
for mixing and/or pumping out of drums. Made from stainless steel, FFKM seal.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Stainless steel
Compare the suitable pumps
Click a column heading to sort.
| Pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| FP 430 Ex S-41/38 FOOD | FFKM | FP 430 | Stainless steel | FFKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | EC 1935/2004 |
| FP 424 Ex S-43/38 | EPDM | FP 424 | Stainless steel | EPDM | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 430 S-41/38 | EPDM | F 430 | Stainless steel | EPDM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | no |
| FP 424 Ex S-43/38 | FEP | FP 424 | Stainless steel | FEP | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
| F 430 S-41/38 | FFKM | F 430 | Stainless steel | FEP/FFKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | Yes | no |
| FP 424 Ex S-43/37 Z | FEP | FP 424 | Stainless steel | FEP | 120 l/min | 24 mWk | 1,200 mPas | 700 mm | Yes | no |
| FP 424 Ex S-50/45 Z | FEP | FP 424 | Stainless steel | FEP | 160 l/min | 30 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| F 430 PP-40/33 | EPDM | F 430 | Polypropylene | EPDM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PP-41/36 | EPDM | F 424 | Polypropylene | EPDM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 | FFKM | F 430 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| MINIFLUX S-41/38 | FFKM | 136 mm | F 430 | Stainless steel | FFKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| F 430 S-41/38 TR | FEP/FFKM | F 430 | Stainless steel | FEP/FFKM | 240 l/min | 13 mWk | 1,000 mPas | – | Yes | no |
| F 424 PVDF-41/36 | FFKM | F 424 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| FP 425 Ex S-41/34 | EPDM | FP 425 | Stainless steel | EPDM | 220 l/min | 13 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| FP 425 Ex S-41/34 | FFKM | FP 425 | Stainless steel | FFKM | 220 l/min | 13 mWk | 1,200 mPas | 1,000 mm | Yes | no |
| F 425 PP-50/34 | EPDM | F 425 | Polypropylene | EPDM | 120 l/min | 12 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 426 S-41/38 | FFKM | F 426 | Stainless steel | FFKM | 240 l/min | 13 mWk | 900 mPas | 1,000 mm | Yes | no |
Suitability applies at the stated concentration and temperature. Unsure about your application? Our specialists are happy to advise.