F 430 PVDF-40/33 | FFKM

with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FFKM seal.

Item no.: 10-43069112

Max. flow rate: 205 l/min
Max. discharge head: 13 mWk
Material: Polyvinylidene fluoride

Immersion length

1000 mm
1200 mm

Questions? Call +31 (0)316 29 66 90 · ma t/m do 08:00–17:00, vr 08:00–15:45

Overview

The F 430 drum pump can be used universally for a huge range of different media and is suited to pumping out of IBCs (immersion length 1200 mm). It is ideal for tasks where the medium is changed frequently and when working with media that cures, dries quickly or crystallises. The design featuring a mechanical seal to cover the inner tube means that the drum pump can be quickly and easily dismantled into its two main components. This makes good cleaning possible. Exclusively from FLUX: The inner tube reinforced with metal core of the plastic versions (PP and PVDF). This allows the mechanical seal to function to its full ability at all times, preventing leaks and unnecessary wear across all operating temperature ranges. It also ensures maximum stability and permits immersion lengths of up to 3000 mm. If necessary, it can be combined with different motors.

Benefits

Ideal for tasks where the medium is changed frequently and when working with media that cures, dries quickly or crystallises
Can be quickly and easily dismantled into its main components for cleaning
Improved service life when working with abrasive media compared with a sealless pump
In plastic versions, the inner tube reinforced with metal core prevents leaks and unnecessary wear to the mechanical seal across all operating temperature ranges
High stability of the plastic version pumps permits immersion lengths of up to 3000 mm
Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
Quiet operation with particularly low levels of vibration

Technical data

Performance

Max. flow rate: 205 l/min
Max. discharge head: 13 mWk
Max. viscosity: 1,200 mPas

Materials and sealing

Material impeller: ethylene tetrafluoroethylene
Seal material: FFKM
Material: Polyvinylidene fluoride
Material shaft: Hastelloy C
Mechanical seal: PTFE/carbon, oxide ceramics, HC, FFKM

Dimensions and weight

Weight: 2 kg
Connection outlet: External thread G 1 1/4"
Outer diameter: 40,00 mm
Immersion length: 1,200 mm

Approvals

3-A version: No
For use in hazardous areas: No
FDA approval: no
Food approval: no
Ex-marking: without

Other

Type impeller: axial impeller 33 for higher delivery rate
Drum pump type: F 430

Compare the versions

Only the properties that differ are shown.

Property	F 430 PVDF-40/33 \| FFKM	F 430 PVDF-40/33 \| FFKMThis page
Item no.	10-43069110	10-43069112
Immersion length	1,000 mm	1,200 mm
Weight	1.7 kg	2 kg

Media

This product is suitable for 273 media. The list is a guide for common applications.

A

Acetic acid10% · 20 °C
Acetic acid10% · 40 °C
Acetic acid25% · 20 °C
Acetic acid25% · 40 °C
Acetic acid50% · 20 °C
Acetic acid50% · 40 °C
Acetic acid80% · 20-40 °C
Ammonia solution100% · 20 °C
Ammonia solution100% · 40 °C
Ammonium nitrate10% · 20-40 °C
Ammonium nitrate50% · 20-40 °C
Ammonium phosphate10% · 20-40 °C
Ammonium sulphate10% · 20 °C
Ammonium sulphate10% · 40 °C
Arsenic acid10% · 20-40 °C
Arsenic acid80% · 20-40 °C

B

Battery acid40% · 20-40 °C
Benzaldehyde100% · 20 °C
Benzoic aldehyde30% · 20 °C
Benzoic aldehyde100% · 20 °C
Benzyl alcohol100% · 20 °C
Benzyl alcohol100% · 40 °C
Bicarbonate of soda10% · 20 °C
Bicarbonate of soda10% · 40 °C

Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.

Need advice on F 430 PVDF-40/33 | FFKM?

Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.

F 430 PVDF-40/33 | FFKM