F 430 AL-41/38
for pumping petroleum products out of IBCs.
- Item no.
- 10-40710012
- EAN
- 4260387213103
- Motor type
- FEM 4070
- Max. flow rate
- 65 l/min
- Max. discharge head
- 9.5 mWk
- Rated output
- 0.5 kW
- Supply voltage
- 230-240 V
- Material
- Aluminium
Immersion length
- 1000 mm
- 1200 mm
Overview
Fully-prepared pump kit comprising F 430 drum pump (immersion length 1200 mm) with mechanical seal, aluminium outer tube and FEM 4070 commutator motor (500 W). A hose line, pump nozzle and compression gland are also included. The pump can be disassembled into two parts without any tools.
Benefits
- Easy to disassemble
- Universal and flexible use
- Easy to clean because medium cannot get into the inner tube
- Medium is not dispersed so the pump can be used for different media
- Also suited to sluggish media and liquids that crystallise or harden
Technical data
Performance
- Max. flow rate
- 65 l/min
- Max. discharge head
- 9.5 mWk
- Max. viscosity
- 600 mPas
- Suction side
- without
Electrical
- Cooling
- internal ventilated
- Rated output
- 0.5 kW
- Protection class
- IP 24
- Speed control
- yes
- Supply voltage
- 230-240 V
- Motor type
- FEM 4070
- Cable length
- 5,00 m
- Frequency
- 50-60 Hz
- Type plug
- CEE 7/17-plug
- Undervoltage prot.
- yes
Materials and sealing
- Material impeller
- ethylene tetrafluoroethylene
- Seal material
- NBR
- Material
- Aluminium
- Material shaft
- stainless steel
- Mechanical seal
- PTFE/carbon, oxide ceramics, S, NBR
- Type hose line
- mineral oil-hose
Dimensions and weight
- Weight
- 6.05 kg
- Immersion length
- 1,200 mm
- Outer diameter
- 34,00 mm
- Hose length from
- 2,0 m
- Nominal diameter
- DN 25 mm
Approvals
- For use in hazardous areas
- No
- FDA approval
- no
- Food approval
- no
Other
- Drum pump type
- F 430
- Ø outlet spout
- 25 mm
Set components
Hand Nozzles
Materials and sealing
- Inliner
- no
- Material inside
- NBR black
Approvals
- Ex-marking
- without
Other
- Swivelling
- yes
- Base part
- 41 mm
- Shaft bearing
- slide bearing - not in contact with the medium
- Dry installation
- no
Compare the versions
Only the properties that differ are shown.
| Property | F 430 AL-41/38 | F 430 AL-41/38This page |
|---|---|---|
| Item no. | 10-40710010 | 10-40710012 |
| Immersion length | 1,000 mm | 1,200 mm |
| Weight | 5.81 kg | 6.05 kg |
Media
This product is suitable for 64 media. The list is a guide for common applications.
A
- Ammonia solution100% · 20 °C
- Ammonium nitrate10% · 20-40 °C
- Ammonium nitrate50% · 20-40 °C
- Ammonium sulphate10% · 20 °C
B
- Bicarbonate of soda10% · 20 °C
- Bicarbonate of soda10% · 40 °C
- Boric acid10% · 20-40 °C
- Butylene glycol10% · 20-40 °C
C
- Calcium chloride10% · 20-40 °C
- Calcium nitrate50% · 20-40 °C
- Castor oil100% · 20-40 °C
- Cooking oil100% · 20 °C
- Cooking oil100% · 40 °C
- Copper nitrate25% · 20 °C
- Copper nitrate25% · 40 °C
- Crude oil100% · 20-40 °C
D
E
- Ethylene glycol100% · 20 °C
- Ethylene glycol100% · 40 °C
F
- Formamide100% · 20 °C
G
- Glucose100% · 20-40 °C
- Glucose solution100% · 20-40 °C
- Glycol100% · 20 °C
Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.
Downloads
Data sheets
Manuals
Declarations of conformity
Drawings and diagrams
Inquiry forms
Other documents
Accessories and related
Accessories
Pump bracket
for drum and container pumps.
- Material:
- Stainless steel
Accessories
Screw cap
for IBCs, DN 150
- Material:
- Polypropylene
Accessories
Screw cap
for IBCs, DN 225
- Material:
- Polypropylene
- Variants available
F 300 - for small filling quantities
F 430 AL-41/38
for pumping petroleum products out of drums.
- Motor type:
- FEM 4070
- Max. flow rate:
- 65 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 300 - for small filling quantities
F 430 PP-40/33
for pumping acids and alkalis out of IBCs. Pump with mechanical seal.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.41 kW
F 300 - for small filling quantities
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Rated output:
- 0.5 kW
- Supply voltage:
- 230-240 V
- Material:
- Polypropylene
F 300 - for small filling quantities
F 424 PP-41/36
for pumping acids and alkalis out of IBCs. Sealless pump.
- Motor type:
- FEM 4070
- Max. flow rate:
- 60 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 300 - for small filling quantities
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 18 mWk
- Rated output:
- 0.5 kW
Need advice on F 430 AL-41/38?
Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.