Suitable medium
Pumps for Chromic acid, 30%, 20 °C
9 FLUX pumps are suitable for Chromic acid, 30%, 20 °C. Compare them below by type, material, flow rate and head.
- Concentration
- 30%
- Temperature
- 20 °C
Suitable pumps
F 400 - for low viscosity media-from drums or IBCs
F 430 PVDF-40/33
for pumping concentrated acids out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.46 kW
Flow Meter
FLUXTRONIC® evaluation electronics
no control cable, for FMC, FMO 104, FMO 110 as well as VISCOPOWER F 580 with motor flange and integrated pulse generator
View product
Drum and container pumps
F 430 PVDF-40/33 | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 430 PVDF-50/43 Z | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, semi-axial rotor.
- Max. flow rate:
- 110 l/min
- Max. discharge head:
- 30 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 430 PVDF-50/38 | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, 50 mm diameter.
- Max. flow rate:
- 240 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 430 PVDF-40/33 Z | FKM
with mechanical seal, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal, semi-axial rotor.
- Max. flow rate:
- 100 l/min
- Max. discharge head:
- 24 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 430 PVDF-40/33 | FFKM
with mechanical seal, for pumping out of canisters. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PVDF-41/36 | FKM
sealless, for pumping out of drums. Made from polyvinylidene fluoride, FKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Drum and container pumps
F 424 PVDF-41/36 | FFKM
sealless, for pumping out of drums. Made from polyvinylidene fluoride, FFKM seal.
- Max. flow rate:
- 205 l/min
- Max. discharge head:
- 13 mWk
- Material:
- Polyvinylidene fluoride
Compare the suitable pumps
Click a column heading to sort.
| Pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| F 430 PVDF-40/33 | F 430 | Polyvinylidene fluoride | FKM | 40 l/min | 9.5 mWk | 600 mPas | 1,000 mm | No | no |
| FLUXTRONIC® evaluation electronics | – | – | – | – | – | – | – | – | – |
| F 430 PVDF-40/33 | FKM | F 430 | Polyvinylidene fluoride | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-50/43 Z | FKM | F 430 | Polyvinylidene fluoride | FKM | 110 l/min | 30 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-50/38 | FKM | F 430 | Polyvinylidene fluoride | FKM | 240 l/min | 13 mWk | 1,000 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 Z | FKM | F 430 | Polyvinylidene fluoride | FKM | 100 l/min | 24 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 430 PVDF-40/33 | FFKM | F 430 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PVDF-41/36 | FKM | F 424 | Polyvinylidene fluoride | FKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
| F 424 PVDF-41/36 | FFKM | F 424 | Polyvinylidene fluoride | FFKM | 205 l/min | 13 mWk | 1,200 mPas | 1,000 mm | No | no |
Suitability applies at the stated concentration and temperature. Unsure about your application? Our specialists are happy to advise.