FLUX Pompen Benelux logo
Back to overview
F 400 - for low viscosity media-from drums or IBCs

MINIFLUX S-41/38-136

for emptying IBCs via outlet.

Item no.
10-40729000
EAN
4260387214230
Motor type
FEM 4070
Max. flow rate
60 l/min
Max. discharge head
9 mWk
Rated output
0.5 kW
Supply voltage
230-240 V
Material
Stainless steel, Polypropylene

Overview

Fully-prepared pump kit for emptying IBCs (with standard S60x6 thread) via their outlet. The MINIFLUX is intended as an alternative to vertical drum pumps for cases where IBCs can only be accessed from above with great difficulty if at all. It is also ideal if the medium’s natural outlet via the outlet tap does not provide sufficient pumping pressure for filling at speed or transferring to a container at a higher level, for example. The MINIFLUX is driven by a commutator motor. The light pump with its compact design (total weight of 1.2 kg) does not have to be raised up to the container and can be simply connected to the outlet using a union nut. It can be disassembled into two parts via the clamp.

Benefits

  • Can also be used in locations with low ceilings
  • When IBCs are stacked one on top of another, also allows pumping from the bottom outlet
  • Considerably higher flow rate and pumping pressure compared with filling at the outlet tap using the hydrostatic pressure of the medium
  • Low overall space requirement
  • Easy to remove from IBC via union nut

Technical data

Performance

Max. flow rate
60 l/min
Max. discharge head
9 mWk
Max. viscosity
1,000 mPas
Suction side
union nut S60 x 6

Electrical

Rated output
0.5 kW
Protection class
IP 24
Speed control
yes
Supply voltage
230-240 V
Motor type
FEM 4070
Frequency
50-60 Hz
cooling
internal ventilated
cable length
5,00 m
type plug
CEE 7/17-plug
undervoltage prot.
yes

Materials and sealing

Seal material
FKM
Material
Stainless steel, Polypropylene
material impeller
ethylene tetrafluoroethylene
material shaft
stainless steel
mechanical seal
PTFE/carbon, oxide ceramics, HC, FKM
type hose line
pvc hose

Dimensions and weight

Weight
4.84 kg
outer diameter
27,00 mm
hose length from
2,0 m
nominal diameter
DN 19 mm

Approvals

For use in hazardous areas
No

Other

Drum pump type
F 430
Ø outlet spout
25 mm

Set components

Hand Nozzles

Materials and sealing

Inliner
no
material inside
PVC with a wire coil

Approvals

Ex-marking
without

Other

swivelling
yes
base part
without mm
shaft bearing
slide bearing - not in contact with the medium
dry installation
yes

Media

This product is suitable for 62 media. The list is a guide for common applications.

A

  • Ammonium nitrate10% · 20-40 °C
  • Ammonium nitrate50% · 20-40 °C
  • Ammonium phosphate10% · 20-40 °C
  • Ammonium sulphate10% · 20 °C

B

  • Bicarbonate of soda10% · 20 °C
  • Borax10% · 20-40 °C
  • Borax100% · 20-40 °C
  • Boric acid10% · 20-40 °C
  • Boric acid100% · 20-40 °C
  • Butanedioic acid50% · 20-40 °C

C

  • Calcium chloride10% · 20-40 °C
  • Calcium chloride100% · 20-40 °C
  • Calcium hydroxide15% · 20 °C
  • Calcium nitrate50% · 20-40 °C
  • Caustic soda10% · 20 °C
  • Citric acid50% · 20 °C
  • Cooking oil100% · 20 °C
  • Copper nitrate25% · 20 °C
  • Copper sulphate18% · 20 °C

E

  • Ethylene glycol100% · 20 °C
  • Ethylene glycol100% · 40 °C

F

  • Fruit juices100% · 20-40 °C

G

  • Glucose100% · 20-40 °C
  • Glucose solution100% · 20-40 °C

Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.

Downloads

Data sheets

Manuals

Declarations of conformity

Drawings and diagrams

Inquiry forms

Need advice on MINIFLUX S-41/38-136?

Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.