FLUX Pompen Benelux logo
Back to overview
Drum and container pumps

FP 425 Ex S-41/34 | EPDM

for 99.98 % residual & drum emptying. Made from stainless steel, EPDM seal.

Item no.
10-42528011
  • ATEX
Max. flow rate
220 l/min
Max. discharge head
13 mWk
Material
Stainless steel

Overview

When using the FP 425 drum pump (with mechanical seal to cover inner tube, immersion length 1000 mm), less than 0.05 l of residue is left in a 200-l drum, i.e. a maximum of 0.02 %. The drum pump has a built-in backflow valve which can be closed with ease using two adjusting levers before removing the drum pump from the container. This prevents the medium in the drum pump from flowing back into an emptied drum. This enables optimum use to be made of particularly expensive media and, when working with problematic media, spares the operator additional costs for cleaning drums and disposal. The drum pump is made from stainless steel; it can therefore also be used in areas subject to explosion hazards. If necessary, the drum pump can be combined with different motors.

Benefits

  • Optimum residual emptying leaving e.g. less than 0.05 l of residue in a 200-litre drum
  • No 'tipping' to fully empty the drum
  • Reduction in drum cleaning and/or disposal costs
  • optimum use of costly fluids
  • Medium is not lost when transferring the pump from one drum to the next
  • Can be operated temporarily against a closed valve (pump nozzle, ball cock, etc.), up to stated max. operating temperature
  • Stainless steel version can be used in areas subject to explosion hazards

Technical data

Performance

Max. flow rate
220 l/min
Max. discharge head
13 mWk
Max. viscosity
1,200 mPas

Materials and sealing

Seal material
EPDM
Material
Stainless steel
material impeller
ethylene tetrafluoroethylene
material shaft
stainless steel
mechanical seal
PTFE/carbon, oxide ceramics, HC, EPDM

Dimensions and weight

Weight
3.87 kg
Immersion length
1,000 mm
connection outlet
External thread G 1 1/4"
Outer diameter
41,00 mm

Approvals

3-A version
No
Ex marking
Ex II 1/2 G Ex h IIB T4…T3 Ga/Gb
For use in hazardous areas
Yes
FDA approval
no
Food approval
no

Other

Drum pump type
FP 425
type impeller
axial impeller 34 for higher delivery rate

Media

This product is suitable for 160 media. The list is a guide for common applications.

A

  • Acetic acid10% · 20 °C
  • Acetic acid10% · 40 °C
  • Acetic acid25% · 20 °C
  • Acetone10% · 20 °C
  • Acetone100% · 20 °C
  • Ammonia solution100% · 20 °C
  • Ammonia solution100% · 40 °C
  • Ammonium nitrate10% · 20-40 °C
  • Ammonium nitrate50% · 20-40 °C
  • Ammonium phosphate10% · 20-40 °C
  • Ammonium sulphate10% · 20 °C
  • Ammonium sulphate10% · 40 °C
  • Amyl alcohol100% · 20 °C
  • Amyl alcohol100% · 40 °C
  • Arsenic acid10% · 20-40 °C
  • Arsenic acid80% · 20-40 °C

B

  • Benzyl alcohol100% · 20 °C
  • Bicarbonate of soda10% · 20 °C
  • Bicarbonate of soda10% · 40 °C
  • Borax10% · 20-40 °C
  • Borax100% · 20-40 °C
  • Boric acid10% · 20-40 °C
  • Boric acid100% · 20-40 °C
  • Brake fluid100% · 20 °C

Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.

Downloads

Data sheets

Manuals

Declarations of conformity

Drawings and diagrams

Inquiry forms

Other documents

Need advice on FP 425 Ex S-41/34 | EPDM?

Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.