FP 424 Ex S-43/38 | FKM
for pumping highly flammable media out of drums with compressed air motor.
- Item no.
- 10-41624110
ATEX
- Motor type
- F 416 Ex
- Max. flow rate
- 0 l/min
- Max. discharge head
- 0 mWk
- Rated output
- 0.47 kW
- Material
- Stainless steel, brass nickel plated
Overview
Fully-prepared pump kit comprising F 424 drum pump (immersion length 1000 mm), sealless near the media, stainless steel outer tube, hose line, pump nozzle and compression gland. The drum pump is driven by the F 416 compressed air motor. The pump has explosion protection and is non-wearing. Openings ensure that the liquid level inside the pump is the same as that in the drum.
Benefits
- No wear to seals and bearings
- Medium is not contaminated by abrasive wear from sealants or lubricants
- Low maintenance and durable
- For use in areas subject to explosion hazards
Technical data
Performance
- Max. flow rate
- 0 l/min
- Max. discharge head
- 0 mWk
- Max. viscosity
- 0 mPas
Electrical
- Rated output
- 0.47 kW
- Speed control
- via supply air
- Motor type
- F 416 Ex
Materials and sealing
- Seal material
- FKM, PTFE
- Material
- Stainless steel, brass nickel plated
- material impeller
- ethylene tetrafluoroethylene
- material shaft
- stainless steel
- mechanical seal
- without
- type hose line
- universal hose
Dimensions and weight
- Weight
- 8 kg
- Immersion length
- 1,000 mm
- outer diameter
- 31 mm
- hose length from
- 5 m
- nominal diameter
- DN 21 mm
Approvals
- Ex marking
- Ex II 2G Ex h IIC T6 Gb
- For use in hazardous areas
- Yes
Other
- Drum pump type
- FP 424
- Ø outlet spout
- 25 mm
Set components
Hand Nozzles
Performance
- operating pressure
- 6 bar
Materials and sealing
- Inliner
- yes
- material inside
- Fluoropolymer THV seamless
Approvals
- Ex marking
- Ex II 1/2 G Ex h IIB T4…T3 Ga/Gb
Other
- swivelling
- yes
- base part
- 43 mm
- shaft bearing
- guide bearing PTFE with fibreglass and graphite
- air consumption
- 14 l/s
Media
This product is suitable for 40 media. The list is a guide for common applications.
A
- Acetone10% · 20 °C
- Acetone10% · 40 °C
- Acetone100% · 20 °C
- Acetone100% · 40 °C
- Amyl acetate100% · 20 °C
- Amyl alcohol100% · 20 °C
B
- Benzine100% · 20 °C
- Bicarbonate of soda10% · 20 °C
- Butyl acetate100% · 20 °C
- Butylene glycol10% · 20-40 °C
- Butylene glycol100% · 20 °C
C
- Calcium hydroxide15% · 20 °C
- Castor oil100% · 20-40 °C
D
- Diesel100% · 20 °C
- Dimethylformamide (DMF)100% · 20 °C
E
- Ethanol100% · 20 °C
- Ethyl glycol100% · 20-40 °C
- Ethylene glycol100% · 20 °C
G
- Glucose100% · 20-40 °C
- Glucose solution100% · 20-40 °C
- Glycol100% · 20 °C
H
- Heating oil100% · 20 °C
I
- Isobutyl alcohol100% · 20-40 °C
- Isopropanol100% · 20-40 °C
Is your medium not listed? Other media are often possible too. Request a quote and we will advise you personally.
Downloads
Data sheets
Manuals
Declarations of conformity
Drawings and diagrams
Other documents
Similar products
F 400 - for low viscosity media-from drums or IBCs
F 430 PP-40/33
for pumping acids and alkalis out of IBCs. Pump with mechanical seal.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.41 kW
F 400 - for low viscosity media-from drums or IBCs
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Rated output:
- 0.5 kW
- Supply voltage:
- 230-240 V
- Material:
- Polypropylene
F 400 - for low viscosity media-from drums or IBCs
F 424 PP-41/36
for pumping acids and alkalis out of IBCs. Sealless pump.
- Motor type:
- FEM 4070
- Max. flow rate:
- 60 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
F 400 - for low viscosity media-from drums or IBCs
F 424 PP/S-41/35Z
for filling Adblue® from IBCs.
- Motor type:
- FEM 4070
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 18 mWk
- Rated output:
- 0.5 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 S-41/38 | FKM
for pumping a huge range of media out of drums, with compressed air motor.
- Motor type:
- F 416 Ex
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 13 mWk
- Rated output:
- 0.47 kW
F 400 - for low viscosity media-from drums or IBCs
FP 427 S-43/38 FOOD | FKM
for pumping food and pharmaceutical products out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 50 l/min
- Max. discharge head:
- 8 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 PVDF-40/33
for pumping concentrated acids out of drums.
- Motor type:
- F 458
- Max. flow rate:
- 40 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.46 kW
F 400 - for low viscosity media-from drums or IBCs
F 430 AL-41/38
for pumping petroleum products out of drums.
- Motor type:
- FEM 4070
- Max. flow rate:
- 65 l/min
- Max. discharge head:
- 9.5 mWk
- Rated output:
- 0.5 kW
Need advice on FP 424 Ex S-43/38 | FKM?
Request a free quote or have us call you back. Our specialists help you choose the right pump for your medium.